Slitting Machine Use Precautions:
1. The power supply for the cutting machine is three-phase four-wire (AC380V) and is safely grounded to ensure operator safety.
2. The host speed should be adjusted to the minimum speed before starting the machine.
3.Regular maintenance should be carried out on the place where the machine needs to be refueled.
4.The spindle and the circular knife use a continuously variable transmission system, which can work with high and low speed regulation and forward and reverse switching control.
5. The double-sided sharpening system is equipped with diamond grinding. The life of the grinding wheel can be up to two years, and the blade does not need to be disassembled. The knife can be sharpened and the blade is sharp for a long time to achieve the best cutting quality. It is also equipped with a vacuum cleaner to keep the fabric and track clean.
6. Imported ball slides are used to parallelly advance the cutting width, and the imported precision ball screw and slide rails are used to control the cutting width and 0.1 mm to achieve high-precision cutting.
7.Adopting imported ball slides, parallel propulsion and cutting. Imported AC motor adjustment system is steplessly adjusted to control the cutting speed and is not easy to wear, achieving high quality cutting.
8. The operation interface of the slitting machine uses the LCD Chinese display, which can directly input several kinds of cutting width and quantity settings, and has manual and automatic conversion functions.
9. With a fast material discharge design, one step is in place. Loading and unloading can be done in one operation.
Thank you for reading! End
