Ten Safety Procedures For Automatic Die Cutting Machines
Safety procedures:
1. The personnel who operate the automatic die-cutting machine need to undergo very strict training. They must be trained and qualified to master the equipment’s operational skills and various safety features.
2, the automatic die-cutting machine must check whether the parts of the equipment are normal before starting. You need to see if the switch and the safety device are reliable and you need to add lubricant to the right part.
3, check the automatic die-cutting machine related equipment above the tools and other items, the advantage is to avoid crushing the equipment.
4, when the automatic die-cutting machine starts the operation, usually only one person is allowed to operate, and then it is to observe whether someone else performs other work on the device.
5, the automatic die-cutting machine must be in a stopped state when repairing, adjusting fueling, maintenance and cleaning, and the device safety cover should be opened and the lock button pressed.
6. The hand is not allowed to reach the pressure plate during the operation of the automatic die cutting machine. Some places need to be adjusted and shut down. During the production process, the operator or other relevant personnel must not drill under the machine to adjust the equipment.
7, the automatic die-cutting machine operator in the disassembly of the socialization of the template, must open the protection settings, carefully check whether the fixture is secure.
8, when using the non-stop delivery, the operator’s fingers must leave the work area, the advantage is to avoid danger. The paper pile needs to be observed abnormally during the ascent, which has the advantage of avoiding damage to the equipment.
9. The paper feeder must not be adjusted during the operation, because it will get involved in the injury. 10, in the operation of the automatic die-cutting machine, after drinking alcohol or suffering from a serious illness can not be employed.
