The cost of a small die-cutting machine is high, but it can’t produce a one-sided production power that is higher than that of a manual die-cutting machine (such as die-cutting some jigsaw puzzles or non-paper products). The power of a small die-cutting machine depends mainly on what the die-cutting product is, perhaps long and short. The larger the number of orders, the more suitable for small die-cutting machines. Today, I will talk about how small die-cutting machines can increase production power.
1. Select a large number of order organizations to produce on small die-cutting machines;
2. At the time of production, the captain and the assistant should cooperate with each other to shorten the time of the model;
3. If it is an old product that is often die-cut, you can leave the backing paper for the next use. If you use the paper, you can save 20% of the proofing time;
4. Try to reduce the downtime during the operation, and try to choose not to stop the paper for change when the production is made;
5. When the die-cut corrugated paper is changed before and after the plate change, the assistants work together to shorten the downtime;
6. Find a manual hydraulic forklift one minute earlier when changing the plate to prevent the forklift from wasting time;
7. The machine speed is as fast as possible without affecting the product quality. Do the above, I believe that the power of the small die-cutting machine will be improved.
What Qualities Should The Die-Cutting Machine Captain Have?
1. Understand the operation performance of the die-cutting machine, skillfully operate the machine to complete the production tasks handed over by the company, and the production indicators. The operation is serious and responsible, and requires no less than three years of experience in the printing and packaging industry.
2. Before the start-up, the upper knife version should be carefully checked and corrected. The die-cutting knife and the die-cut paper should be checked. The first sample must be completed before the production. The first sample is not finished, and the quality is presented during the production process. Take full responsibility.
3. During the operation, the pressure should be adjusted to prevent the knife from being injured. When cutting the mold, pay attention to it. Do not burr, crack, storm line or broken skin. If the pressure of multiple die-cutting is too light, it will cause trouble in the subsequent process.
4, in the production process to do a diligent review, the requirements of not less than 500 to view once, to prevent the above problems to be noted. To make a good record of production, the data of the number of production work orders is completed and there is no false data.
5, do the site 5S processing (the machine is not dirty, the work site is neat and orderly), the machine equipment is regularly maintained, and the machine repair report is required to be written.
