With the presentation of various high-end smart phones, in order to achieve better user experience, the requirements for the touch screen of mobile phones are getting higher and higher. The quality of the mobile phone touch screen is becoming more and more important. The automatic laminating machine is the primary production equipment for mobile phone stickers. When using the automatic laminating machine to produce the screen, the operation of the automatic laminating machine has a direct impact on the quality of the produced mobile phone touch screen. In order to advance the quality of the screen, it is necessary to grasp the correct operation method, which can also prevent many problems, which requires the operator to deepen the understanding of the automatic laminating machine operation procedures. So, what are the operating procedures of the automatic laminating machine? Please listen to the professional and technical personnel for us.
1. Before the work, be sure to check the instructions in detail and prepare for the work.
2. Before starting the machine, check the power supply, whether the air source and the vacuum pump are connected properly. After the power is turned on, it is also required to check whether the various devices can work normally.
3. The color filter substrate and the thin film transistor substrate are aligned in a vacuum environment to complete the bonding process.
4. Adjust the speed controller to the temperature, speed and pressure to be fitted, and wait until the temperature reaches the proper temperature to start the operation.
5, the automatic laminating machine in the work process should always check the fastness of the fit, to ensure the arrival of quality standards.
6, the special attention is that the manual or automatic operation of the automatic laminating machine in the work process, to stop the hand and any part of the body into the inside of the fitting equipment, so as not to cause danger.
