Digi Spot UV and Foil Machine

The machine is solution for spot UV coating and digital stamping (cold foil stamping) without mold or plate.It can creates 3D effects and metallic effects for printings.
we can customize according to your requirement.OEM/ODM project is acceptable.

Coating Process:

Empty the air and spray the coating for preparation before UV coating. Spot coating and /or Cold Foil Stamping continually Inkjet heads move to seal covers for protection,avoid light and dust.

Cold stamping Technology

Foil stamp apply only on the area where there is coating.
There is foil-save design in cold foil station.When the stamping area is very small, the foil can pull back and use the foil again to lower down production cost.

Digital Spot UV

With DoD inkjet heads, you can do spot UV directly from computer file to the printings, easy and fast.

3D effect

In one pass, you can make different thickness of coating from 10 micron to 100 micron, good for personization design.

Digital stamping

Without die or plate, you can do stamping directly from computer file to the printings, saving the time and cost of making plate.

Multiple stamping

With several pass, you can do multiple stamping to bring glittering effect to the printings. It can have stamping effect and spot UV in one printing.

Max.Size	370mmX645mm
Min.Size	210mmX297mm
Max.Coating Width	350mm
Coating Thickness	0.02-0.1mm
Coating Speed	19m/min
Registration Precision	±0.1mm
Paper Thickness	157-450gsm
Max.Foil Length	1200mm