Bottle Label Seaming Machine

Bottle Label Seaming Machine
Bottle Label Seaming Machine

Bottle Label Seaming Machine is used for forming a PVC, PET heat-shrinkable film material into a roll-shaped packaging material, such as a beverage bottle label, a battery label, a pen holder, and the like.

Configuration introduction:
 

  1. The main machine adopts variable frequency motor, and the vector inverter realizes closed-loop control with precise speed and uniform coating of low, medium and high speed.
     
  2. Unwinding base tension is selected from Taiwan magnetic powder brake control accuracy.
     
  3. Unwinding constant tension control, acceleration and deceleration tension inertia compensation.
     4. The base alignment is selected by ultrasonic tracking and correcting machine, the edge-to-line accuracy is ±0.1mm, the highest tracking linear velocity is 25mm/s, and the pushing range is ±70mm.
     
  4. The reel adopts a 3-inch air-expansion shaft, and the edge-correcting mechanism adopts a linear shaft and a linear bearing.
     
  5. The diameter of the traction steel bar is Φ90mm×320mm, and the surface is hard-finished to finish the mirror.
     
  6. The diameter of the traction rubber stick is Φ90mm×320mm, and the rubber material is polyurethane.
     
  7. The steel bar clutch is pneumatically executed at both ends simultaneously, the cylinder diameter is Φ50mm×20mm stroke, and the air pressure is adjusted arbitrarily.
     
  8. The traction rubber rod is driven independently by the timing belt to the variable frequency motor.
     
  9. The take-up reel uses a slat-type air expansion shaft.
     
  10. Winding adopts variable frequency motor and tension control.
     
  11. The length of the winding reaches the automatic stop.
     
  12. The glue is automatically pumped, the flow is automatically controlled, the glue is automatically turned on, and the glue is automatically closed (automatic suction).
     
ModelA50
Unwinding diameter 500mm
ReWinding diameter 700mm
Form width 250mm
Work speed 250-300m/min
Supply voltage 380V 50HZ
Overall power 3.5Kw
Dimension 3180*1450*1550mm